how to change a flat
.... This lets people know that there is some trouble with the car. Now that the car is in park and the hazard lights are on, go to the trunk and pull out the car jack, lug wrench, and spare tire. If you do not want your hands to get messy, it is best to keep gloves in the car. If necessary, remove the hub cap. Some cars do not have hub caps. Using the lug wrench, loosen the lug nuts. Sometimes it is difficult to loosen lug nuts. If this problem occurs, trying placing your foot on the lug wrench and stomp at it. Make sure you do not remove the lug nuts; only loosen them. Next, consult the owner's manual to see where the car jack needs to be positioned. Position the jack under the car, and raise the jack until it contacts the frame. Make sure the jack is positioned properly and extend the jack until the tire is about six inches off the ground. The next step is to remove the lug nuts and set them aside. Then, pull the tire straight and off the car. Now, grab the spare tire and position it directly in front of the wheel well. Align the holes in the center of the spare tire with the bolts on the car. Lift the spare tire and posit...